跳到主要內容區

芮祥鵬 博士

實驗室: 高分子流變暨熱分析實驗室  詳細資料

學歷:

       美國凱斯西儲大學
Case Western Reserve University Ph.D.高分子工程 博士 

       美國克拉克森大學
Clarkson University M.D.化工 碩士 

       國立臺灣大學
National Taiwan University 化學學士

辦公室：分子館 2 樓 (02)27712171 #2432 

研究室：分子館 4 樓 (02)27712171 #2430

E-mail：f10714@ntut.edu.tw

影片介紹：
北科塗佈研發中心 - 簡介影片
智慧型及記憶型高分子材料
簡歷 專長 學術與著作 三年內核定計畫

簡歷

  1. 1990.10~1992.07 BASF Co. (USA) Fiber R&D Professional Engineer (Ⅰ)
  2. 1992.07~1994.10 BASF Co. (USA) Fiber R&D Professional Engineer (Ⅱ)
  3. 1994.10~2002.10 國立台北科技大學紡織工程暨有機高分子研究所 副教授
  4. 1997.02~2000.02 國立台北科技大學紡織工程暨有機高分子研究所 副教授兼系主任所長
  5. 2001.08~2004.02 國立台北科技大學分子科學工程系暨有機高分子研究 教授兼學務長
  6. 2002.10~2005.12 國立台北科技大學分子科學工程系暨有機高分子研究 教授
  7. 2005.03~2009.07 國立台北科技大學有機高分子研究 教授兼研發總中心主任
  8. 2009.08~ 國立台北科技大學有機高分子研究 教授兼副校長

專長

  1. 高分子加工
  2. 電磁流變
  3. 生物流變
  4. 融熔紡絲

學術與著作

  1. Horwatt, S. W., Rwei , S. P., Manas-Zloczower, I.*, Feke, D.L., “The Influence of Interstitial Liquids on the Cohesive Strength of Carbon-black Agglomerates” Rubber. Chem. Tech., 62, p 928, 1989 (SCI)
  2. Rwei , S. P., Manas-Zloczower, I.*, Feke, D.L.,“Observation of Carbon Black Agglomerate Dispersion in Simple Shear Flows” Polym. Eng. Sci., 30(12), p 701, 1990 (SCI)
  3. Rwei , S. P., Manas-Zloczower, I.*, Feke, D. L “Characterization of Agglomerate Dispersion by Erosion in Simple Shear Flows” Polym. Eng. & Sci., 31(8), p. 558, 1991 (SCI)
  4. Rwei , S. P., Manas-Zloczower, I.*, Feke, D. L. ”Analysis of dispersion of carbon black in polymeric melts and its effect on compound properties” Polym. Eng. Sci. 32(1), p 130, 1992 (SCI)
  5. Rwei, S.P.*, Tang, H.I., Hu, Y.R., Bai, C.C.," Dog-Legging in the Melt Spinning Process", Polym. Eng. Sci., 38(2), p 341, 1998 (SCI)
  6. Rwei, S.P.*, " Properties of Poly(Ethylene Terephthalate) / Poly (Ethylene Naphthalate) Blends", Polym. Eng. Sci., 39(12), p 2475,1999 (SCI)
  7. Rwei, S.P.*, " Modification of PET in High-Speed Melt Spinning by Blending with PEN", Polym. Eng. Sci., 40(1), p 191, 2000 (SCI)
  8. Rwei, S.P.*, Ku, F.H., " The Dispersion of Pigment Slurries via Incorporation with Water- soluble Sulfonate Poly (ethylene- terephthalate)", Colloid Polym. Sci., 279(3), p 274, 2001 (SCI)
  9. Rwei, S.P.*, Pai, H.I., Wang I.C., " Fluid Simulation of The Airflow in Interlacing Nozzles", Text. Res. J., 71(7), p 630, 2001 (SCI)
  10. Rwei, S.P.* " Distributive Mixing in a Single -Screw Extruder—Evaluation in the Flow Direction" , Polym. Eng. Sci., 41(10), p 1665, 2001 (SCI)
  11. Rwei, S.P.* " Formation of Hollow Fiber in The Melt Spinning Process", J. Appl. Polym. Sci., 82, p 2896, 2001 (SCI)
  12. Rwei, S.P.*, Pai, H.I.," Fluid Simulation of the Airflow in Texturing Jets", Text. Res. J., 72(6), p520, 2002 (SCI)
  13. Cheng, K.C.*, Don, T.M., Rwei, S.P., Li, Y.C., Duann, Y.F., " Monte Carlo Simulation of Diepoxides and Monoepoxides Cured with Amines", J. Polym. Sci.--Polym. Phys., 40, p 1857, 2002 (SCI)
  14. Rwei, S.P.*, Ku, F.H., Cheng K.C.," Dispersion of Carbon Black in a Continuous Phase : Electrical, Rheological, and Morphological Studies", Colloid Polym. Sci.,280, p1110, 2002(SCI)
  15. C.C. Chu, C.F. Yeh, L. Wang, T.I. Ho, S.P. Rwei “Synthesis and Characterization of Tetraaniline-containing Copolymer”, Synthetic Metals, 135/136, pp 109-110, 2003 (SCI)
  16. L. Wang*, C. C. Chu, C. F. Yeh, T. I. Ho and S. P. Rwei “Synthesis and characterization of tetraaniline-terminated starburst poly(urethane-urea) “ Synthetic Metals, 135/136, pp 111-112 , 2003 (SCI)
  17. Rwei, S.P.*, Kao, S.C., Liou, G.S., Cheng, K.C., Guo, W., " Curing and Pyrolysis of Cresol Novolac Epoxy Resins Containing [2-(6-oxido-6H-dibenz(c,e) (1,2) oxaphosphorin-6-yl)-1,4-naphthalenediol]" Colloid Polym. Sci., 281, pp 407-415, 2003 (SCI)
  18. Rwei, S.P.*, Liu, A.Y., Liou, G.S., Cheng, K.C., Guo, W., " Curing and Pyrolysis of Epoxy Resins Containing ODOPN [2-(6-oxido-6H-dibenz(c,e) (1,2)oxaphosphorin-6-yl)-1,4-naphthalenediol] or Bisphenol-S " Polym. Eng. Sci., 44, pp376-387, 2004 (SCI)
  19. Rwei, S.P.*, Ni, S.K. "Formation, Characterization, and Prevention of Deposit- Dust Generation during Fiber or Fabric Processing of PET Materials" Text. Res. J.,74(4), pp581-586, 2004 (SCI)
  20. Rwei, S.P.*, Jue, Z.F., Chen, F.L. " PBT/PET Conjugated Fibers: Melt Spinning, Fiber Properties, and Thermal Bonding" Polym. Eng. Sci., 44, pp331-344, 2004 (SCI)
  21. Rwei, S.P.*, , H. Y. Lee, S.D.Yoo, L. Y. Wang, J. G. Lin “Magnetorheological Characteristics of Aqueous Suspension that Contains Fe3O4 Nanoparticles” Colloid Polym Sci, 283, pp 1253–1258, 2005 (SCI)
  22. Rwei, S.P.*, Cheng C.Y., Liou G.S., Cheng , K.C. “Curing and Pyrolysis of Cresol Novolac Epoxy Resins Containing [1,4-bis(3-aminobenzoyloxy)-2- (6-oxido-6h-dibenz(c,e)(1,2) oxaphosphorin-6-yl)-naphthalene]” Polym. Eng. and Sci., 45, pp 478-486, 2005 (SCI)
  23. Rwei, S.P.*, Lin ,Y. T., Su ,Y. Y., ”Study of Self-crimp Polyester Fibers” Polym. Eng. Sci., 45, pp 838-845, 2005 (SCI).
  24. Wang, L.Y.,* Ji, J. S., Lin, Y. J., and Rwei, S.P., "Novel poly(3-nonylthiophene)-TiO2 hybrid materials for photovoltaic cells," Synthetic Metals, 155, pp 677-680, 2005 (SCI)
  25. Lin, H.L., Liu, Y.F., Yu, L.T.*, Liu, W.H., Rwei, S.P., “Light Scattering and Viscoelasticity Study of Poly(vinyl alcohol)–borax Aqueous Solutions and Gels” Polymer 46, pp 5541–5549, 2005(SCI)
  26. Rwei, S.P.*, Chen, T.Y., Cheng, Y.Y., “Sol/Gel Transition of Chitosan Solutions”, J. Biomater. Sci. Polym. Ed 16, pp 1433-1445, 2005 (SCI)
  27. Mao , C. F.*, Rwei, S.P. “Cascade analysis of mixed gels of xanthan and locust bean gum” Polymer 47, pp 7980-7987, 2006 (SCI)
  28. Ji, J. S., Lin, Y. J., Lu, H. P., Wang, L*., Rwei, S.P. “Synthesis and photoluminescence of poly(3-hexylthiophene)/titania nanostructured hybrid” Thin Solid Films 511 – 512, pp182 – 186, 2006 (SCI)
  29. Rwei, S.P.*, Wang, L., “Synthesis and electrical, rheological and thermal characterization of conductive polyurethane” Colloid Polym Sci 285, pp1313– 1319 2007 (SCI)
  30. Rwei, S.P.*. and Liu, M. L., “Synthesis of High Performance Phosphorine Antioxidants and Their Application to mCOC”, Fibers and Polymers, Vol.9, No.1, pp 1-6, 2008 (SCI) (IF: 0.836, 7/21, SCI Mateial textile)
  31. Rwei, S.P.*, Kuo, D.S, “Observation and Analysis of Unsteady-State Contact Angle on Interface between Polymer Melt and Carbon Black”, Composite Interfaces, 15, pp.351-361, 2008 (SCI) (IF: 0.438, 17/24, SCI Material composite)
  32. Rwei, S.P.*, Chen, S.W, Fang, H.W., Mao , C. F., “Viscoelasticity and Wearability of Hyaluronate Solutions” Bio. Eng. J., 40, pp211-217, 2008 (SCI) (IF: 2.645, 20/133, SCI chemical Eng.)
  33. Lee, H. Y., Rwei, S.P.*, Wang, L.*, Chen,P. H. “Preparation and characterization of core-shell polyaniline-polystyrene sulfonate@Fe3O4 nanoparticles” Mater. Chem. Phys. 112, pp805-809, 2008 (SCI) (IF: 2.234, 51/232, SCI Material: multi)
  34. Rwei, S.P.*, Lyu,M.S.,Wu, P.S.,Tseng,C.H.,Huang, H.W., “Sol/gel transition and liquid crystal transition of HPC in ionic liquid”, Cellulose, Vol.16,1, pp.9-17, 2009 (SCI) (IF: 3.6, 1/21, SCI Mateial textile)
  35. Su,Y.Y., Rwei, S.P.,Wu,L.Y., Lin,Y.T., An,T.C.,Lin,W.P., Chien,S.P., Lin, L.Y., “Shaping Conjugated Hollow Fibers Using a Four-Segmented Arc Spinneret” , Polym. Eng. Sci., Vol 51, 4, pp. 704–711, 2011(SCI) (IF:1.302, 39/79, SCI Polymer)
  36. Rwei, S.P.*, Chen,J.D., “Investigating the UV-curing performance for polyacrylated polymer in dendritic and regular conformation” Polym.Bull .68,pp.493–505, 2012 (SCI) (IF. 1.532, 33/79, SCI Polymer)
  37. Tseng,Y.C., Rwei, S.P.*, “Synthesis and Characterization of the Feed Ratio of Polyethylene Oxide (0 ~ 10 Wt % PEO) in the Nylon-6/PEO Copolymer System”, J.Applied Polymer Science,Vol 123, 2, pp 796- 806, 2012 (SCI) (IF: 1.289, 40/79, SCI Polymer)
  38. Yu, J.f., Shen,T.L.,Weng, W.H., Huang ,Y.C., Huang,C.I. Su,W.F., Rwei, S.P., Ho,K.C., Wang, L.Y., “ Molecular Design of Interfacial Modifi ers for Polymer-Inorganic Hybrid Solar Cells” Adv. Energy Mater., 2, pp. 245–252, 2012(SCI) (IF:1.950 (newly joint SCI), SCI, Material Multi.)
  39. Su,Y.Y., Rwei, S.P.*, Gou ,W.J., Chan, H.H., Cheng ,K.C., “Effect of polar interactions on the structure and rheology of EVA/Montmorillonite nanocomposites”, J. of Thermoplastic Composite Materials 25(8) 987–1003, Nov. 2012 (SCI) (IF: 0.81, 10/24, SCI Mateial composite)
  40. Rwei, S.P.* ,Lin,Y.T., Su,Y.Y. “Investigation on the spinnability of metallocene cyclicolefins copolymer melt” , Textile Research Journal, 82: 315-323, March 2012 (SCI) (IF: 1.122, 3/21, SCI Mateial textile)
  41. Rwei, S.P.*, Huang,C.C.,“Electrospinning PVA Solution-Rheology and Morphology Analyses”, Fibers and Polymers, Vol.13, No.1, 44-50, 2012 (SCI) (IF: 0.836, 7/21, SCI Mateial textile)
  42. Rwei, S.P.*, Tseng,Y.C., “Synthesis and Characterization of Polyethylene Oxide & Nylon-6 Copolymer in a Fiber Form”, Journal of Applied Polymer Science, Vol. 126, E206–E217, Nov. 2012 (SCI) (IF: 1.289, 40/79, SCI Polymer)
  43. Yu T., Wu C. M., Chang C. Y., Wang C. Y.,Rwei, S.P.“Effects of crystalline morphologies on the mechanical properties of carbon fiber reinforcing polymerized cyclic butylene terephthalate composites” eXPRESS Polymer Letters Vol.6, No.4 ,318–328, 2012 (SCI) (IF: 1.769, 28/79, SCI polymer)
  44. Rwei, S.P.*, Lyu,M.S., ”3-D phase diagram of HPC/H2O/H3PO4 tertiary system”, Cellulose, 19(4), pp 1065-1074, 2012 (SCI) (IF: 3.6, 1/21, SCI Mateial textile)
  45. Rwei, S.P.*, Lin W.P., Wang J. F. “Synthesis and Characterization of Biodegradable and Weather-durable PET/PEG/NDC Copolymers” Colloid and Polymer Science, 290, pp 1381–1392, 2012 (SCI) (IF: 2.331, 21/79, SCI Polymer)
  46. Liu, H.W., Chang, D.Y., Chiu W.Y., Rwei, S.P. and Wang L.Y. “Fullerene bisadduct as an effective phase-separation inhibitor in preparing poly(3-hexylthiophene)–[6,6] -phenyl-C61-butyric acid methyl ester blends with highly stable morphology” Journal of Materials Chemistry, 22, pp. 15586-15591, 2012 (SCI) (IF:5.968, 17/232, SCI, Material Multi.)
  47. Chinnusamy Saravanan, Che-Liang Liu, Yi-Min Chang, Jan-De Lu, Yen-Ju Hsieh, Syang-Peng Rwei and Leeyih Wang [60] ”Fulleropyrrolidines bearing π-conjugated moiety for polymer solar cells: contribution of the chromophoric substituent on C60 to photocurrent” ACS Appl. Mater. Interfaces, 4, pp. 6133-6141, 2012 (SCI) (IF:4.525 27/232, SCI, Material Multi.)
  48. Rwei, S.P.*, Lyu, M.S. “HPC/H2O/H3PO4 tertiary system: a rheological study” Cellulose 20:135–147, 2013 (SCI) (IF: 3.6, 1/21, SCI Mateial textile)
  49. Rwei, S.P.*, Tseng, Y.C., Chiu, K.C., Chang, S.M., Chen, Y.M. “The Crystallization Kinetics of Nylon 6/6 T and Nylon 66/6 T Copolymers” Thermochimica Acta 555, pp. 37– 45, 2013 (SCI) (IF:1.532, 33/79, SCI Polymer)
  50. Rwei, S.P.*, Chen, J.D., Su, C.M., “Kinetics of UV-curing of waterborne polyurethane acrylate dendrimer” Polym. Bull. 70:1019–1035, 2013 (SCI) (IF:1.532, 33/79, SCI Polymer)
  51. Rwei, S.P.*, Wang, L.Y. and Yang P.W., “Synthesis and Magnetorheology Study of Iron Oxide and Iron Cobalt Oxide Suspensions”, J. Nanomaterials, Volume 2013, Article ID 612894, 7 pages (SCI) (IF:1.376, 104/232, SCI, Material Multi.)
  52. Rwei, S.P.*, Wang, L.Y. and Chen M.J., “The Study of Magnetorheology of Iron Oxide Nanowires," J. Nanomaterials, Volume 2013, Article ID 745746, 8 pages (SCI) (IF:1.376, 104/232, SCI, Material Multi.)

近三年內核定及申請中之研究計畫

國科會專題研究計畫

# 補助或委託機構 案號 計畫名稱 計畫金額 起訖日期
1 國科會專題研究計畫 101-2221-E-027-038-MY3 熔紡PAN/DMI碳纖前驅物之低溫環化動力學及相關流變分析 1166000 2012-08-01~2013-07-31
2  國科會專題研究計畫  101-2623-E-027-005-IT  高強力耐候建築用PTFE布膜製程研發計畫﹝I﹞  1500000  2012-01-01~2012-12-31
3 國科會專題研究計畫 NSC 98-2221-E-027-004-MY3 環狀烯烴聚合物（COC）之流變、抽絲及低介電輕質電路板基材開發研究 1108000 2011-08-01~2012-07-31
4 國科會專題研究計畫 98-2221-E-027-003-MY3 磁性流體之奈米磁粒子製備及磁流變研究 678000 2011-08-01~2012-07-31
5 國科會專題研究計畫 98-2221-E-027-004-MY3 環狀烯烴聚合物(COC)之流變、抽絲及低介電輕質電路板基材開發研究 1223000 2010-08-01~2011-07-31
6 國科會專題研究計畫 98-2221-E-027-003-MY3 磁性流體之奈米磁粒子製備及磁流變研究 621000 2010-08-01~2011-07-31
7 國科會專題研究計畫 98-2221-E-027-004-MY3 環狀烯烴聚合物（COC）之流變、抽絲及低介電輕質電路板基材開發研究 1451000 2009-08-01~2010-07-31
8 國科會專題研究計畫 98-2221-E-027-003-MY3 磁性流體之奈米磁粒子製備及磁流變研究 837000 <2009-08-01~2010-07-31/td>

產學合作

1 企業產學計畫案(頂新) 2012414 醬料包PE材篩選研究 400000 2012-07-01~2013-06-30
2 政府產學計畫案(中科院) 2012408G 軟式多層膜新複合材料製作與測試方法評估 690000 2012-05-25~2012-11-30
3 其他單位產學計畫案(紡綜所) 2012406G 推動先進紡織技術發展學研中心計畫 200000 2012-03-01~2012-12-31
4 其他單位產學計畫案(紡綜所) 2012405G 高強力耐候建築用PTFE布膜製程研發3年計畫-高支數低經緯密玻纖網布製作 500000 2012-01-01~2012-11-30
5 其他單位產學計畫案(經濟 部) 1001351 高強力耐候建築用PTFE布膜製程研發3年計畫 30000000 2011-12-01~2014-11-30
6 政府產學計畫案(經濟部) PT100171583 100年度學界協助中小企業科技關懷計畫-- 生質材料塑鋼拉鍊開發 60000 2011-08-01~2011-12-31
7 其他單位產學計畫案(紡綜所) 1001199 推動先進紡織技術發展學研中心計畫 200000 2011-04-01~2011-12-31
8 其他單位產學計畫案(紡綜所) 1001201 熔噴用聚乙烯醇原料開發 500000 2011-04-01~2011-12-31
9 政府產學計畫案(南科管理局) 991357 長效耐溫型電子用感應膠帶開發計畫 956000 2010-10-01~2011-09-30
10 政府產學計畫案(經濟部) PT099170615 學界協助中小企業科技關懷計畫--防水塑鋼拉鍊開發 72000 2010-07-01~2010-12-31
11 其他單位產學計畫案(紡綜所) 991169 高儲靜電性母粒材料開發計畫 500000 2010-04-01~2010-12-31
12 其他單位產學計畫案(紡綜所) 991168 推動先進紡織技術發展學研中心計畫 200000 2010-04-01~2010-12-31